Factory wholesale Aluminum Grinder - Grain Mill – Haina

Short Description:

Thank you for using stainless steel grain Cereal Mill! In order to give full play to device performance, please read carefully before you use this manual. I. Technical parameters model 1200 2200 3000L Voltage 220 220/380 220/380 Motor Power 1.1 2.2/2.4 3.5 Motor Speed 1420 1400 1400 Capacity 15—40 30—50 30-80 Fineness 50-200 50-200 50-200 Size(cm) 53X23X51 47X22X34 55X28X41 62X31X41 Weight(kg) 30/27 40 65 II....


Product Detail

Product Tags

Related Video

Feedback (2)

We can constantly satisfy our respected customers with our good high quality, good price tag and good support due to we have been additional specialist and extra hard-working and do it in cost-effective way for 4 Parts Herb Grinder , Electric Metal Herb Grinder , Metal Meat Cutting Machine , Our hugely specialized process eliminates the component failure and offers our consumers unvarying high quality, allowing us to control cost, plan capacity and maintain consistent on time delivery.
Factory wholesale Aluminum Grinder - Grain Mill – Haina Detail:

Grain Mill

Thank you for using stainless steel grain Cereal Mill! In order to give full play to device performance, please read carefully before you use this manual.
I. Technical parameters

model

1200

2200

3000L

Voltage

220

220/380

220/380

Motor Power

1.1

2.2/2.4

3.5

Motor Speed

1420

1400

1400

Capacity

15—40

30—50

30-80

Fineness

50-200

50-200

50-200

Size(cm)

53X23X51

47X22X34

55X28X41

62X31X41

Weight(kg)

30/27

40

65

II. Milling machine operation and adjustment.

1. Open the front cover, will be moving grinding, springs,top shaft,bearings,etc. Installed.
2. The hopper into the feed port into the shell cover. In the milling,the feed should be noted that Volume, adjust flapper, so as not to feed too fast, stuck motor.
3.In order to prevent static grinding rotation, loosening, apply screw fixed to the milling of its cavity.

  1. Milling, the materials required to dry, wet material may not be used, otherwise will stick to grinding ,not material.

5. Grinding the working space must be based on the thickness of the material needed to adjust when you first release the adjustment nut, thickness by adjustment screws to adjust properly,it will tighten the adjustment nut.
6. Dynamic adjustment of grinding, remove the moving grinding, grinding on the release of three screws, remove the spring, will move back to even-axis grinding equipment, and then adjust grinding, grinding until it coincides with the static grinding disc.

III. Notes

1. Each pre-boot, should check Grinding, action
Grinding and into the grinding hopper fastening screw is loosened,and tighten them.
2. By the end of each machine should be clean inside the machine,and ventilation Dry.
3. Machine parts found to have serious wear and tear or damage should be promptly repaired or replaced.
4. Longer period of time the machine when not in use, the machine not to inverted, please horizontally,and cut off the power.
5.The level of the machine should be installed.in the table.
6. The machine starts, it should be running only when the normal discharge process, pay attention to fluxes card readers to prevent motor overload.
7. During processing, such as a sudden shutdown because of power failures and other reasons, must be removed in order to restart the  milling chamber materials.
8. Processed grain cereals, Chinese herbal medicine when the need to dry, remove stones, metal and other debris.
9.In strict accordance with the provisions ground line, the motor should be to counter clockwise turn, the normal operation of the machine is the same as always, before operation processing material.
Four. method of operation

A. operation methods

1. The machine before use every day to check whether the machine running normal, static abrasive disc and dynamic abrasive disc of whether there is a screw loose, and to screw up.
2, grinding dry material
Grinding dry material need grinding twice,first coarse grinding, the second fine grinding.
The first rough grinding, regulating adjusting screw to abrasive disc has a slight sound friction voice, again to coarse back to adjust to just not grating, and then open the feed opening plug edition 1/2 — can be a third.
The second fine grinding, regulating adjusting screw to abrasive disc has a slight sound friction voice, again to fine adjustment adjusting screw 1/6—1/4 turn, (according to the fineness of grinding requirements a control) abrasive disc have ear-piercing sound grating and then open the feed opening plug edition 1/2 — can be a third.
3, grinding dry and oily mixed material
Method 1
Grinding dry and oily mixed material need grinding twice, first coarse grinding, the second fine grinding.
The first rough grinding, regulating
adjusting screw to abrasive disc just has a slight sound friction voice, again to coarse back to control adjusting screw a circle, and then completely open the feed opening board can; (grind materials almost half of the size of a grain of rice).
The second fine grinding, regulating
adjusting screw to abrasive disc just has a slight sound friction voice to open the feed opening board 1/4 — can be a third.
Method 2
The first will dry material mill (and ground dry material operation method).
The second will have been grinding good dry material and oily materials mixing, and then control adjusting screw to abrasive disc just has a slight sound friction voice, then open the feed opening board 1/4 — can be a third.
4. grinding contain sugar high material Grinding contain sugar high material, (for
example, red jujube, kumquat tablet,Chinese wolf berry, etc.) sugar high material must baking dry, water, or frozen two hours to grinding, only need to grind a, regulate the adjusting screw to abrasive disc just Have a slight sound friction
voice, then open the feed opening board can, (separate grinding carrot tablet need
grinding twice,first coarse grinding and grinding dry material, first coarse grinding operation, the second fine grinding regulation adjusting screw to abrasive disc just have sound of friction voice, then open the feed opening board 1/4 — can be a third).
5. grinding contain sugar high mixing materials, operating method and ground dry
and oily mixed materials same operation method.

Second, change abrasive disc

1.. remove the old mill tablet (abrasive disc have positive and negative, the static abrasive disc and dynamic abrasive disc can
exchange use).
2. installed abrasive disc, adjust the abrasive disc inner hole and crushing set or dynamic millstones installation_position of the gap even to tighten the screws.
3, regulating abrasive disc flat: open machine, regulate the adjusting screw to polish a harsh voice, run 20-30 seconds, stop open the front end cover, take out abrasive disc, with the hand gently touch static abrasive disc around feel which position temperature high or low temperature, high temperature position description abrasive disc high, low temperature position description abrasive disc low,(or see
abrasive disc which position tooth light or no ground light, the position of the light that high, not the position of the light that low.)

The location of the high fixed abrasive disc screw tightening, low position fixed abrasive disc of the screw loose a bit, and open machines repeat the operation until the abrasive disc regulation level off, the lock screw.
Three, running in abrasive disc

1, take two or three catties rice into the funnel, start machine control adjusting screw to abrasive disc just has a slight sound.
Friction voice, again to fine adjustment adjusting screw a third-two-thirds cirele,
abrasive disc have ear-piercing sound grating, open the feed opening plug edition 1/2-a third, repeat the grinding out of the rice flour rewind funnel grinding 15-20 minutes, and then take 2 two or so rice according to grinding dry material method operation, try a grinding out rice meets the fineness requirement.
If did not reach the fineness requirement repeat the above operation.

VI, Common Faults and exclusion method

Failure phenomenon Failure reason Remedy
Motor does not start 1 Check overloador boot problems Check overload switch whether is  damaged Replace Overload Switch
Motor weakness,the temperature
is too high
Motor windingshort-circuit Central
motor bearing damage
The long-term overload
Overhaul motor,Replace Motor Bearing
According to the work of rated load
The machine strong vibration Couplings bendingBearing   damage
Dynamic  Grinding
uneven
Replace Couplings ReplaceBearings Balance between regulation Grinding
Machinery choked to death Metal. stones andother hard objects
into the machine,
causing parts damage
Stop the machine, andMaintenance
The product is too coarse Grinding unfairnessGrinding rupture or defect Adjust dynamic and staticGrinding the balance degree
Replacement Grinding
Ergonomics is too low Grinding bluntingMaterials are too
small and difficult
to feed
Replacement Grinding
The machine halted Feeding too muchVoltage is too low
d Grinding choked
to death
Replacement GrindingDo not use the machine during
Peak

Wearing parts: moving grinding disc.

Packing List

Mill 1
Funnel 1
Grinding 1
Overload device 1
Brush 1
Manual 1
Warranty Card 1
Note:380 Voltage machine does  not  overload device

Product detail pictures:

Factory wholesale Aluminum Grinder -
 Grain Mill – Haina detail pictures

Factory wholesale Aluminum Grinder -
 Grain Mill – Haina detail pictures

Factory wholesale Aluminum Grinder -
 Grain Mill – Haina detail pictures

Factory wholesale Aluminum Grinder -
 Grain Mill – Haina detail pictures


Related Product Guide:
Cooperation

Dedicated to strict high-quality management and considerate shopper company, our experienced team associates are normally available to discuss your requirements and ensure full shopper gratification for Factory wholesale Aluminum Grinder - Grain Mill – Haina, The product will supply to all over the world, such as: Bhutan , Czech , Latvia , With the advanced workshop, professional design team and strict quality control system, based on mid- to high-end marked as our marketing positioning, our products are fast selling onto European and American markets with our own brands such as below Deniya, Qingsiya and Yisilanya.
  • Cooperate with you every time is very successful, very happy. Hope that we can have more cooperation!
    5 Stars By Evangeline from New Zealand - 2018.07.27 12:26
    The factory workers have rich industry knowledge and operational experience, we learned a lot in working with them,we are extremely grateful that we can encount a good company has excellent wokers.
    5 Stars By Priscilla from Honduras - 2017.10.23 10:29

    Related Products

    

    Newsletter

    Follow us

    • sns03
    • sns02
    • sns01