Meat Bone Saw TQ-210 Frozen Meat Bone Cutting Machine

Short Description:

  • FOB Price: US $0.5 - 9,999 / Piece
  • Min.Order Quantity: 100 Piece/Pieces
  • Supply Ability: 10000 Piece/Pieces per Month
  • Product Detail

    Product Tags

    ★Installation and debug

    The main complication to let it longer life is install correctly and debug band saw bar, Well body rigidity and good quantity. To prevent librating and big infection of different kinds of stress to the bar.To avoid the sawtooth demising and coiling, and the bar rupturing.
    The machine should be placed to the level ground or desktop, you can adjust the level via the four feels.
    Open the door, put the hand saw bar on the belt and bearing down. Must be barred out the belt, all gear get into the groove of whee.
    Pressing close the belt. For model 210,running the lower handle as per the brand's direction. For model 300,circumrotating top knob, it can adjust the degree of tightness to not loose. Too close will lost the saw belt life, too loose that can not working in normally.
    Loosen the orientation glove of top adjustable box,it can adjust the right left position fromrunning belt. Just avoid the attrition of working plate with clean rags.
    Adjust the bolt of outbox, adjust the angle of bow and admire of running shaft, to let the belt would not falI off when testing the machine. till the belt hack and limit bearing would not attrition.
    Close the door, then the machine can start working in gear.

    Meat Bone Saw1248 Meat Bone Saw1249


    Model 210 and 300 Bone Saw are newly developed product with high efficiency and low consume, Good looking and easy operate, it suitable for break up various bones with meat, frozen meat, poultry and fishes etc. Used Widely in hotel,restaurant etc. The body of Model 300 is stainless steel. All machine parts in contact with food are made of stainless steel or are plated, and are in conformity with China hygiene standard saw.

    Technical specifications

    Model 210 300
    Voltage 220V 220-380V
    Frequency 50HZ 50HZ
    Rating input power 0.95KW 1.95KW
    Power 0.75KW 1.5KW
    Blade wheel diameter 210mm 300mm
    Blade speed 15m/s 15m/s
    adle size 400x436mm 712x662mm
    Cutting thickness 4-180mm 30-250mm
    IPNO Dimensions 520×490×840(mm) 780x710x1690(mm)
    Net weight 45kg 98kg


    Before use, check that the power supply corresponds to that required by the machine and that the external caching wire is reliable connected.
    For very power educe line which has attach plug, should be connected to the Switch of at lease3mm touch-point distance which installed by user Rated current of the switch must be not lower than 35A
    Open the door, check that the tow meat scrapers keep close to the saw blade, the supports just the back of the saw blade.
    According to the requirement, lose the lock nut and adjust the position the meat location plate, then tighten the locating pole.
    Put the hone(or meat)between the feeding handle and the saw blade, lift the meat feeding handle by left hand, push the material to the locating plate by right hand, then push feeding handle to feed the material ahead until it is cut off.

    Attention 1: do not touch the running saw blade.

    Each time before use, clean saw blade and other working parts with water. After the job, clean carefully the machine, open the door, sweep out the crumbs of meat and bone inside the machine and clean the parts as above to ensure hygiene.

    Attention 2: It can not be cleaned by water directly.

    Replace the saw blade if the sawing speed is slow.
    If the saw blade does not work after start up of the motor make sure the cover is impressed and the electric connectors link well. (refer to the adjusting and operation.)
    Notes: this machine installed electric motor protect device, it will stop the power automatically when it overload or under reverse circles. Can be protected and let the electric motor safety, now showed be shut down the power, clean out obstination, then restart the machine after connect power.

  • Previous:
  • Next:

  • Related Products



    Follow us

    • sns03
    • sns02
    • sns01